Level Sensor For Solid

Features:

Measurement immunes from the interference of

environment such as sound waves, dust,

capacitance, or temperature change.

User-friendly in touch buttons with

microprocessor-based calculation design.

High level and low level alarm.

LCD Dot matrix: 8 x 2.

Analog output: 4-20mA dc.

Pulse output:

   Transistor output NPN/PNP 

   Relay output 3A/250Vac (10mm/pulse)

Cable Break Alarm: System will detect cable

broken during measuring.

Plumb Buried Alarm: System will detect plumb

buried by the medium.

Start Modes: auto start, manual start,

intelligent start, and external triggered start.

Intelligent Start: Measuring interval is inverse

proportional to medium level.

Auto Return Setup: Prevent sensing weight from

buried or sliding into the tank pivot and avoid

damage facility equipment while tank is empty.

Material Fill-Up Protection: Reduce the possibility

of plumb being buried.

Measuring range of 30m (Standard), max. up to

40 m.

RS485 MODBUS communication protocol.

Flexible coupling (optional as per application) Robust, dust and watertight housing . Extended Probe possible. Extended life by motor shut off design. sealed bearings. Interchangeable paddle assemblies, Magnetic Clutch mechanism

Technical Specifications (Standard) :

   SWITCHING UNIT:

• Housing: Aluminum, weather proof, powder coated. Integral with The probe
• Cable entry: 2 nos.
• Ambient temperature: 0 ° C to +60° C
• Power consumption: 1.9 VA
• Mains Voltage: 230/110 V AC (+/-15%), 50 Hz
• Output: 1 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
• Switch status display: Green LED shows Normal, Red LED shows alarm condition.
• Mounting : Screwed – 1 ½” BSP (standard) Or Flanged (optional)
• Sense rod : Stainless steel, 12 MM DIA
• Paddle : 1 – 4; Paddles depending upon application.
• Operating Temp in : 80 deg for the standard unit. 200°C ON REQUEST