|
|
 |
Building Automation & Safety |
|
|
Related to Building Automation & Safety
|
|
| 
| SPECIFICATION:
1) Relay 5 Amps for three phase unit
2) Sensor Protection IP 68
3) Maximum Temperature 700 C
4) Two LED for two status
5) Dimensions 80mm , Width 88mm , Height 65mm
6) Consumed Power 3.2VA
FEATURES:
1) Switches on the pump when the water in the overhead tank goes below the pre decided minimum level.
2)2) Switches off the pump when the water level in the overhead tank reaches the maximum level therefore prevents overflow.
3)3) Switches off the pump when the water level reaches the minimum level in the underground tank therefore prevents dry running.
4)Shall again switch on the pump when there is sufficient water in the underground tank.
5) Therefore no need to switch on ir switch off the pump.
6) No move overflow or dry run.Thus,saving water electricity and manpower.
|
Servo Stabilizer & online UPS  Single phase voltage stabilizer:
Input Voltage = 130v-270, 100v-270v,170v-270v Output = 230VAC Power = 20KVA
3 Phase Voltage Stabiliser: Input Voltage = (315V- 470V), (260V- 470V) Output = 415+ 1% Power = 600KVA Online UPS: Input Voltage : 230+15%-20% For Single Phase Input 415V+15%-20% For Three Phase Input, Output Voltage : 220V/230V/240V AC Settable + For Single Phase Input 400V/415V/440V + AC, Settable For Three Phase Input, Output Frequency : 50 Hz + 1% , 60 Hz and 400 MHz Models on special request Harmonic Distortion : < 53% For any Single Harmonics < 5% For total Harmonics (Linear Load) Optional Metering : Microcontroller based scrolling LCD Display for all UPS . Measurable parameters.Analoge Meters provided on request Technology : Sine Weighted multi purpose PWM with MOSFET/IGBT as Switches.Single Pulse Width modulator for Industrial Inverters Bypass : Automatic transfer to Mains in case of overload.Automatic retransfer on removal of overload |
|
|
| FEATURES- Surface mount technology production,Built-in CdS photocell light sensor,Second-to-none square detection range,Easy TIME delay & LUX level selectionAutomatic temperature compensation,Omni-directional detection capability,Detection range mask label provided,Superior RFI/EMI immunity protection,Recess mountable with MB-360 |
PHOTO / TWIN BEAM SENSORS – 30 / 60 / 75 / 120 / 150 Meters Photo / Twin Beam Sensors are recommended for Security for periphery & boundary wall protection. They are available in following detection range: -
2PH-30 C: 60 Meters Indoor / 30 Meters Outdoor -
2PH-60 C: 120 Meters Indoor / 60 Meters Outdoor -
2PH-120 A: 240 Meters Indoor / 120 Meters Outdoor -
2PH-150 A: 300 Meters Indoor / 150 Meters Outdoor -
4PH-75 BQE: 150 Meters Indoor / 75 Meters Outdoor |
|
|
| SPECIFICATIONS:- Improvement of products & its features is a continuous process. Hence, specifications below are subject to change without any notice. 1. Gases Detected - LPG, Natural Gas etc. 2. Alarm Type - Red LED Indication for Gas Audible Alarm (230V AC) 3. Power Supply - 230V ±10%, AC 50 Hz for TS230R +12 V DC for TS12R 4. Power Consumption - About 1.5 Watts 5. Operating Temperature - -10?? to 70 ?? 6. Dimension - 11mm x 90mm x 40mm |
Item Code: AF-1U Our firm brings forth this immaculate variety of SCS Auto Flush system that encompasses the Main Electronic Control Unit and an Electric Valve for the water pipeline. This product has a built-in sensor at the Control Unit that detects an individual in front and accordingly operates the flush valve for the required automatic flushing. It has an adjustable sensing range and flushing duration. Easy to install, this flusher displays the status through green and red indicators installed in the front. Specifications: -
Input: 220 V AC, 50 Hz -
Power: 2 to 6 Watts -
Dimension: 125 mm X 125 mm front -
Indicators: Green for Sensing & Red for Flushing -
Application: Washrooms under construction or renovation where water saving and hygiene is a must -
Settings: Adjustable settings for Sensing Range & Flushing Time -
Water Inlet/Outlet: 1/2 " BSP Inlet/Outlet through Solenoid Valve -
Sensing Range- 500 mm adjustable -
Material/Housing- Stainless Steel Sheet Front with ABS Plastic Body under them wall |
|
|
| ASTRONOMICAL TIME SWITCH uses Microcontroller technology & Intelligent Astronomic Software to calculate Sunset & Sunrise time each day in an Astronomic Year for any Geographic Location. Twilight setting (-60 to 60 Minutes) allows correction of switching time & saving in energy as switching. ON can be delayed from Sunset time in the evening & switching OFF will be earlier than Sunrise time in the morning by set Twilight duration. 1)Automatic switching ON & OFF, No human dependency. 2)By setting Geographic details : Latitude (60 North to 60 South), Longitude (180 East to 180 West)& Time Zone (12:00 East to 12:00 West) Sunset & Sunrise time is calculated every day with an accuracy of +/- 5 Minutes by Astronomic Software. 3)Energy saving output CH2 switches OFF for few hours in night. Specification : Time display : 4 nos. of GREEN LED Display show the Time in 24 Hour format. Setting : 4 user friendly soft keys for setting a) Clock (Hr. : Min., Date : Month, Year). b) Latitude, Longitude, Time Zone. c) Twilight Time, CH2 late night OFF & early morning ON time. Clock Accuracy : Better than +/- 1 Second per Day @ 25°C. Output : 1 N/O switch contact for each Channel max. 4KW (18AMP) Resistive load @ 230VAC. Supply Voltage : 230 V AC + 10%, 50Hz Supply to Clock : Clock runs on internal Battery & will show correct Time when power is applied. Dimension : 145(H) x 110(W) x 60(D) mm. Weight : 1200 Gms. Approx |
Automatic Urinal Flusher(Exposed) Item Code: AF-2U We are a renowned firm offering premium quality Automatic Urinal Flusher (Exposed). This system encompasses a Main Electronic Control Unit with an in-built Electric Valve for the water pipeline. This product is wall mounted and further, it can be retrofitted in your toilets above the urinal pot for an automatic flush. Specifications : -
Input: 220 V AC, 50 Hz -
Power: 2 to 6 Watts -
Dimension: 208 mm X 104 mm X 110 mm -
Indicators: Green for sensing and red for flushing -
Application: This retrofit model can be installed very easily in existing washrooms to ensure proper hygiene and sa -
Settings: Adjustable settings for sensing range and flushing time Water Inlet/Outlet: 1/2 " BSP input/output through a solenoid valve |
|
|
| Sensor Faucet T-2 (Single Line for WB/Counter Top) Item Code: WB3V-T2 Our distinct quality SENSOR & CONROL Automatic Tap Systems are acknowledged for NO TOUCH type tap operation in wash basins or counter tops. The product encompasses a control unit (WB3V) with an in-built valve for water pipeline and sensor fixed tap T-2. Due to its stylish looks, compiled with robust performance, this product is highly admired by our clients. Specifications -
Input: 220 V AC, 50 Hz through 3-way plug in CU -
Power: 1-2 Watts -
Dimension: CU dimensions : 140 X 135 X 90 mm -
Indicators: Green for sensing and red for water flowing in CU -
Application: Small or medium wash basins/counter tops -
Settings: Adjustable settings for sensing range -
Water Inlet/Outlet: 1/2" BSP inlet/outlet through control unit |
CCTV is an acronym for Closed Circuit Television. " Closed circuit" as in, an installation of directly connected components creating a circuit which cannot be viewed by anybody outside of the circuit. This is different to a terrestrial television broadcast system which can be viewed by anybody with an arial/antenna or other reception equipment.
Who needs a CCTV Surveillance System? CCTV systems can be found virtually everywhere these days.
You will have seen CCTV surveillance systems operating in Retail Stores, Service Industry, Home & Residential, Health Care, Schools & Education, Banks, Child Care, Elder Care, Bars & Restaurants, Gaming/Casinos, Entertainment, Health & Social Clubs, Transportaion, Offices, Government, Hospitality, Construction and Industrial - the list is endless. And CCTV is becoming increasingly more common in a domestic situation.
CCTV systems are no longer considered an expensive luxury item, especially when you consider the increased level of security they provide.
In the commercial (business) sector, they can be used for Health and Safety purposes, so that members of the general public can prove that an incident happened or, on the other hand, for employees to fight against fraudulent claims. It also provides security/crime prevention. |
|
|
© Sensor & Control System. All Rights Reserved (Terms of Use)